Proper Cattle Restraint for Stunning
Cartridge fired captive bolt gun
If a stunning box is used, it
should be narrow enough to prevent the animal from turning around. The
floor should be non-slip so the animal can stand without losing its
footing. It is much easier to stun an animal that is standing quietly.
Only one animal should be placed in each stunning box compartment to
prevent animals from trampling on each other.
Stationary slanted shelf in the front of the stun box keeps the animal's head raised
 |
Image courtesy of Humane Slaughter Association |
Hinged panel to raise the animal's head
 |
Image courtesy of Humane Slaughter Association |
If either electric stunning or mushroom head (non-penetrating) captive bolt stunning is used a head holder like the one in this picture or similar to the headholders used for religious slaughter should be used. When non-penetrating captive bolt is used the aim must be exact. This requires holding the animal's head still.When penetrating captive bolt is used a good stunner operator may not need a headholder or one of the simpler shelf systems can be used.
In this head holder, a neck stanchion closes around the neck and a shlef is raised up under the animal's chin.
Pneumatic captive bolt gun
Most large plants restrain cattle in a conveyor restrainer system.
There are two types of conveyor restraints, the V restrainer and the new
center track system. In a V restrainer system, the cattle are held
between two, angled conveyors. In the center track system the cattle
ride astride a moving conveyor.

A very humane position for cattle.
Cattle are restrained in a
comfortable, upright position.
The center track system
provides the
advantages of easier stunning and improved ergonomics because the stunner
operator can stand closer to the animal. Either type of restrainer system
is much safer for workers than a stunning box. Restrainer conveyors are
recommended for all plants which slaughter over 100 head per hour.
Stunning boxes are difficult and dangerous to operate at higher speeds. In
a plant which slaughtered 160 cattle per hour,
replacement of multiple stunning boxes with a conveyor restrainer
eliminated at least one serious accident each year.
Center track double rail restrainer. This system is available for
both sheep and cattle.
Lighting in
the restrainer room over the top of the conveyor will
help induce cattle to raise their heads for the stunner. Cattle should
not be able to see light coming up from under the restrainer because it
may cause balking at the entrance. Restrainer systems should be equipped
with a long, solid hold-down rack to prevent rearing. The hold-down
should be long enough so that the animal is fully settled down onto the
conveyor before it emerges from under it.
If an animal is walking into the restrainer by itself, do not
poke it with an electric prod. Center rack systems require less prodding to
induce cattle to enter it. Workers need to break the "automatic prod
reflex" habit.

Animal entering the center track double rail
restrainer.
Click here to return to the Homepage for more information on animal behavior, welfare, and care.